Driver for ADLINK BIOS NuPRO-760


Download Now
ADLINK BIOS NuPRO-760 Driver

Trademarks. NuPRO. ® is registered trademarks of ADLINK Technology Inc. Other product . your computer cannot boot, the Award BIOS supports an override to the CMOS . tracks while K, M and M all have 80 tracks. Disabled. View and Download ADLINK Technology NuPRO user manual online. can set slower, equal, or faster than CPU FSB than 33MHz in BIOS setting. 20 •. 1PC ADLINK Nupro industrial motherboard P3 CPU motherboard NuPro Bios Rev A A3 P3 Ghz MB SBC NuPro industrial.


ADLINK BIOS NuPRO-760 Driver for Windows Download

Type: Driver
Rating:
3.74
76 (3.74)
Downloads: 859
File Size: 7.81Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
ADLINK BIOS NuPRO-760 Driver

Figure 3: CPU Socket 4.

Push down the CPU into the Socket Push down the release lever and lock it against the key hook. Push down the opposite side of the ZIF clip and hook it. ADLINK BIOS NuPRO-760 the head of the clip to left and lock it.

Connect the cooling fan cable to the socket as shown below. Be careful not to place the cable on the CPU cooling fan.

ADLINK TECHNOLOGY NUPRO USER MANUAL Pdf Download.

To remove the CPU, lift the releasing lever of the Socket The CPU and the heat radiation plate are hot. They may cause burns.

ADLINK BIOS NuPRO-760 Driver Windows

To remove the CPU, reverse the installation steps. Make sure that good contact is made between the processors and the heat sinks. Insufficient contact, incorrect types of heat sinks, fans, or thermal compound ADLINK BIOS NuPRO-760 or improper amount of thermal compound applied on the CPU die can cause the processors to overheat, which may crash the system. Heat Sink Installation 9 ADLINK BIOS NuPRO-760 2.

DIMM modules are installed by placing the chip firmly into the socket at a degree angle and pressing straight down figure 6 until it fits tightly into the DIMM socket. Figure 5: To avoid generating static electricity and damaging the DIMM, ground yourself by ADLINK BIOS NuPRO-760 a grounded metal surface or using a ground scrap before you touch the DIMM.

End of Life Computer Parts & Support Atlas Automation

Do not touch the connector of the DIMM. Dirt residue may cause a malfunction. A DIMM should be inserted into the inner socket first. If ADLINK BIOS NuPRO-760 does not go in smoothly, do not force it.

Pull it all the way out and try again. Make sure the DIMM is properly installed and locked by the tabs on both sides of the socket. Removing a DIMM: Lift it out of the socket.

Make sure you store the DIMM in an anti-static bag and must be populated the same size and manufactory of memory ADLINK BIOS NuPRO-760. You can set the jumpers to make the necessary operations. Figure 7: Jumper Connector For any ADLINK BIOS NuPRO-760 jumpers Figure 7the jumper setting is when the jumper connects pin 1 and 2. The setting is when pin 2 and 3 are connected and so on.

And also, there is a second way of indication — one of the lines surrounding jumpers is thick, which indicates pin NO. To move a jumper from one position to another, use needle-nose pliers or tweezers to pull the pin cap off ADLINK BIOS NuPRO-760 pin and move it to the desired position.

ADLINK BIOS NuPRO-760 Drivers Windows

Use the information in the following table to change the jumpers and the DIP switches. On On Term. On Off Term.

ADLINK Technology NuPRO-760 User Manual

Watchdog Timer Setting Select: Use the information in the following table to change ADLINK BIOS NuPRO-760 connector. Thank you for select Audio Card, here is the description about how to connect the connector and phone jack to use audio functions. Check the contents of the packing:

Relevant Drivers